The cleanliness of your home’s exterior is highly important if you want to increase the overall value and aesthetics of your house. It’s no secret that stucco walls can be prone to dirt, grime, and even mold growth over time if they aren’t properly maintained. The best way to keep them looking crisp and clean is by hiring a professional stucco cleaning service to handle it, but in this blog, we’re going to outline how you can clean stucco walls like an expert on your own time and budget!
Get the right supplies
No matter the size of your home, there’s no denying that getting on a ladder and scrubbing stucco can be difficult. But don’t worry, we’ve put together an easy guide with all of the supplies you need to get started. First things first: it is important to use the right tools and products when cleaning stucco so that you do not damage your home. For example, make sure you are using safe chemicals like those found in Bailey Boys Inc.’s How To Clean Stucco, which contains four different types of cleaners for removing dirt and grime from your exterior walls.
Use long strokes when wiping vertical surfaces
The best way to clean stucco is with a long-handled brush and plenty of water. For vertical surfaces, use straight strokes from top to bottom. Start from the top and work your way down so any dirt or debris will fall off the wall as you work. Starting at the bottom can cause dirt and debris to be pushed up onto previously cleaned areas.
As for horizontal surfaces, start at one corner and use diagonal strokes until you reach the other side.
Use short strokes when wiping horizontal surfaces
Stucco surfaces are tricky because they tend to be textured. This texture can hold onto dirt and grime, so it’s important that you use short strokes when wiping horizontal surfaces. For vertical surfaces, use long strokes as this will help get rid of any dirt and grime that’s been loosened by your first pass over the surface.
Rinse with the right pressure
One of the most important things to do when cleaning stucco is to rinse with the right pressure. You want your water pressure to be between 40-60 psi. For example, if you’re using an electric pressure washer, adjust it so that 40psi is the lowest setting and 60 psi is the highest setting.
You also want to make sure you’re not spraying your water too close, because that could damage the surface of your home.
Clean the edges before moving on
Start by cleaning the edges. Use a small broom and dustpan or pressure washer to clean away dirt and debris from any cracks in the mortar joints. Scrape away any lichen, moss, or other organic growths that are growing on the surface of the wall with a scraper. If you’re using a pressure washer, turn down the water pressure so you don’t blast away too much of the surface material.
Avoid cleaning too often
Don’t worry, you don’t have to start scrubbing just because the weather’s getting warmer. Stucco does a great job of keeping out all the dirt and grime. The only time it needs cleaning is when it starts looking bad. That’s when you’ll want to use these tips for how to clean stucco walls like a pro! What are some steps for how to clean stucco walls?
-Rinse your mop often while cleaning so that the water has enough time to get down into cracks in the wall and make sure they’re wet too. Make sure not to dry your mop on anything rough or coarse as that will damage your wall more than it helps. It also helps if you soak your mop head before going into this process too!
-When washing windows, be sure not to get any detergent on them or it will cause them to be streaky and leave residue behind. Instead, wipe over each one with a cloth that’s been soaked in warm water beforehand then follow up by wiping them off with a dry cloth.
Conlusion
Bailey Boys Inc. has created an in-depth guide on how to clean stucco walls like a pro. The following steps are recommended: 1. Clean the surface of your wall with water and soap (or another cleaning agent). 2. Add one cup of bleach to three gallons of water for added disinfecting power. 3. Apply the cleaning solution using a soft cloth or sponge, leaving it on for about five minutes before rinsing it off with water. Rinse again with clean water if necessary. Finally, wipe dry any remaining moisture from the surface of your wall.
